New website under construction. I still have lots of blanks to fill in but here's a link to the site.
http://www.art-galleries-online.co.uk/artists/wayneburn
The navigation buttons should work so you can have a look around. If you have any questions or comments please email me at the contact address given on the site. In case the address isn't showing it's alkemyartanddesign@yahoo.co.uk
Wednesday, 15 July 2015
Tuesday, 6 November 2012
Cylinder Lamp
The cylinder lamp is made from salvaged copper, wine bottles and a piece of oak burr for the base. The glass insets are wine bottle bottoms with Harvey's sherry bottle chips fused onto them.
Friday, 7 January 2011
Masque
Masque is an illuminated sculptural piece in copper and glass, which stands about 5'6" tall. The mask itself was fabricated from the top of a scrap copper hot water cylinder and sheet copper from the same cylinder. It was coloured using different patinas for the tribal markings and background. The blue glass visor is made from recycled wine bottles and was designed and produced by Barbara Coulam at www.clerestory.co.uk. Inside the mask are 50 medium intensity blue LED's, these can be powered either by the 3 AA batteries mounted inside the mask or from the mains supply using a 4.5V AC mains adaptor plugged into the DC socket fitted in the elm base. The copper coil used to mount the mask is, unfortunately, not recycled and has to be made up by a local company as I have yet to find a way of producing a consistent spiral from scrap copper tubing. So if anyone can suggest a reliable method of doing this, I would be very grateful. The base is the outside slice of an elm burr and has three circular oak feet fitted to the underside.
To purchase this piece or to have one made to order, please email me at alkemyartanddesign@yahoo.co.uk
To purchase this piece or to have one made to order, please email me at alkemyartanddesign@yahoo.co.uk
Crescents
Crescents are made from two interlocking pieces of scrap copper sheet, clipped together and secured by a short length of 15mm copper tubing. The crescent shapes have a patina finish applied while the copper tubing is left as polished copper. The glass candle holders are wine bottle bottoms.
To purchase these or any other pieces please email me at: alkemyartanddesign@yahoo.co.uk
To purchase these or any other pieces please email me at: alkemyartanddesign@yahoo.co.uk
Thursday, 6 January 2011
Spirals
Spirals are made from scrap 15mm copper tubing and oak flooring off-cuts. The copper spirals clip into the oak bases and a tealight clips into the top of the spiral. They are available either gas torched (as shown on the left) or with a patina finish.
Price: gas torched £4
patina finish £5
To purchase these please email me at: alkemyartanddesign@yahoo.co.uk
Price: gas torched £4
patina finish £5
To purchase these please email me at: alkemyartanddesign@yahoo.co.uk
Vino
Vino is made from five slumped wine bottles, mounted on two lengths of scrap 28mm copper tubing. The copper tubes are a tight push fit into the oak base unit. This is made from a recycled oak post and houses the electrics for the 50 high intensity green LED's mounted behind the bottles. As with 'Masque', the LED's can be powered either by the 3 AA batteries in the base unit or from the mains supply using a 4.5V AC mains adapter plugged into the DC socket fitted to the base unit.
This example is a table top version, but a wall mounted one is underway in the workshop and will be available very soon, as will other variations of this piece. This piece can be made to order using any bottles of your choice.
To purchase this piece or to order one, please email me at: alkemyartanddesign@yahoo.co.uk
This example is a table top version, but a wall mounted one is underway in the workshop and will be available very soon, as will other variations of this piece. This piece can be made to order using any bottles of your choice.
To purchase this piece or to order one, please email me at: alkemyartanddesign@yahoo.co.uk
Dragon Moon
This bowl, like the Celtic Spiral one, was made from the bottom of a copper hot water cylinder. The Dragon Moon design and the background have been coloured by applying two different patina finishes. The underside of the bowl has been coloured using a gas torch. The stand is made from oak flooring off-cuts, finished with danish oil.
These can be made to order with a design of your choice.
To purchase this piece or to have one made with your own design on please email me at: alkemyartanddesign@yahoo.co.uk
These can be made to order with a design of your choice.
To purchase this piece or to have one made with your own design on please email me at: alkemyartanddesign@yahoo.co.uk
Subscribe to:
Posts (Atom)